© 2014 by B Marshall Marine Ltd. Proudly created with Wix.com

Overview
Specification

26m Dive Support Vessel

 

Although she is under the 24m mark, DSV Curtis Marshall is a "tardis" like vessel with many unheard of facilites for a vessel of this size, here are a few of note:

  • Unique Bow Fender Assy -Designed specifally for the offshore wind market the vessel is equipped with a bespoke design bow fender for engaging with the with the wind turbine fender. The design incorporates load cells for turbine load monitoring, this data can be logged for client records.

  • Ballast Water transfer system- With a fresh water capacity of circa 25,000 litres, water can be transfered between either of the two aft tanks and the forward. tank. 

  • 12.5 tonne lift capacity. The location of the Atlas crane on the port side of the main deck allows  DSV Curtis Marshall to lift 12.5t over the side of the vessel.

  • Full Walkabout Vessel Control - Bespoke walkabout control system detachable from the helm position which can control all four mooring winches, steering, propulsion and bow thruster.


 

Ready for Service

 

Built to MGN 280 and surveyed by Mecal with the following specification

  • Twin Doosan 4V158TIH engines each producing 530BHP coupled to 60" props.

  • High capacity deck area for diving containers

  • Deck mounted 12.5  tonne crane

  • Deck mounted 25 tonne winch

  • Transom mounted 6 tonne A frame

  • 108kVa Generator,  45Kva Generator

  • 4 point mooring system including 7 tonne winches with 600m of 20mm wire.

  • 2 x 16 man life raft with auto deployment

Dawsons warf aft view.jpg